Gouk and Sullivan | Gouk and Sullivan http://www.gouk.co.nz Complete Electric Motor Solutions Thu, 15 Jan 2015 19:59:53 +0000 en-US hourly 1 On Site Servicing http://www.gouk.co.nz/on-site-4/ http://www.gouk.co.nz/on-site-4/#comments Thu, 27 Nov 2014 00:04:28 +0000 http://www.gouk.co.nz/?p=768 The post On Site Servicing appeared first on Gouk and Sullivan.

]]>
  • image
    Pre clean
  • image
    Pre clean
  • image
    Pre clean
  • image
    After chemical clean
  • image
    After chemical clean
  • image
    After chemical clean

The post On Site Servicing appeared first on Gouk and Sullivan.

]]> http://www.gouk.co.nz/on-site-4/feed/ 0 On Site Servicing http://www.gouk.co.nz/on-site-3/ http://www.gouk.co.nz/on-site-3/#comments Wed, 26 Nov 2014 23:54:06 +0000 http://www.gouk.co.nz/?p=762 The post On Site Servicing appeared first on Gouk and Sullivan.

]]>
  • image
    Pre clean
  • image
    Pre clean
  • image
    Pre clean
  • image
    Pre clean
  • image
    After chemical clean
  • image
    After chemical clean
  • image
    After chemical clean
  • image
    Glass block wrapped with felt, dipped in resin pushed into separate coils on end windings
  • image
    Lashing coil separator  blocks in place
  • image
    Lashing coil separator  blocks in place
  • image
    Over spray with anti-tracking varnish
  • image
    Clean and repairs to generator stator complete
  • image
    Clean and repairs to generator stator complete

The post On Site Servicing appeared first on Gouk and Sullivan.

]]> http://www.gouk.co.nz/on-site-3/feed/ 0 Engineering http://www.gouk.co.nz/engineering/ http://www.gouk.co.nz/engineering/#comments Wed, 26 Nov 2014 23:14:06 +0000 http://www.gouk.co.nz/?p=749 The post Engineering appeared first on Gouk and Sullivan.

]]>
  • image
    1. Cracked rotor bars
  • image
    2. Placement of new bars
  • image
    3. Sliding new bars
  • image
    4. Repair complete
  • image
    5. Balancing rotor
  • image
    6. Painted ready for assembly

The post Engineering appeared first on Gouk and Sullivan.

]]> http://www.gouk.co.nz/engineering/feed/ 0 On Site Servicing http://www.gouk.co.nz/on-site-2/ http://www.gouk.co.nz/on-site-2/#comments Wed, 26 Nov 2014 22:50:28 +0000 http://www.gouk.co.nz/?p=738 The post On Site Servicing appeared first on Gouk and Sullivan.

]]>
  • image
    1. On site HV stator being re-wedged
  • image
    2. On site HV stator being re-wedged

The post On Site Servicing appeared first on Gouk and Sullivan.

]]> http://www.gouk.co.nz/on-site-2/feed/ 0 On site servicing http://www.gouk.co.nz/on-site-1/ http://www.gouk.co.nz/on-site-1/#comments Wed, 26 Nov 2014 22:24:09 +0000 http://www.gouk.co.nz/?p=732 The post On site servicing appeared first on Gouk and Sullivan.

]]>
  • image
    1. HV stator blocking and lashing coils
  • image
    2. HV stator blocking and lashing coils
  • image
    3. HV stator blocking and lashing coils

The post On site servicing appeared first on Gouk and Sullivan.

]]> http://www.gouk.co.nz/on-site-1/feed/ 0 Rewinding-4 http://www.gouk.co.nz/rewinding-4/ http://www.gouk.co.nz/rewinding-4/#comments Wed, 26 Nov 2014 04:21:16 +0000 http://www.gouk.co.nz/?p=703 The post Rewinding-4 appeared first on Gouk and Sullivan.

]]> The post Rewinding-4 appeared first on Gouk and Sullivan.

]]> http://www.gouk.co.nz/rewinding-4/feed/ 0 HV Stator Rewinding http://www.gouk.co.nz/hv-stator-rewinding/ http://www.gouk.co.nz/hv-stator-rewinding/#comments Wed, 26 Nov 2014 03:57:16 +0000 http://www.gouk.co.nz/?p=687 The post HV Stator Rewinding appeared first on Gouk and Sullivan.

]]>
  • image
    1. K.C.E. fitting coils
  • image
    2. Driving wedges into stator
  • image
    3. Fitting coils
  • image
    4. Making connections
  • image
    5. Insulating connections
  • image
    6. Stator rewound and varnished

The post HV Stator Rewinding appeared first on Gouk and Sullivan.

]]> http://www.gouk.co.nz/hv-stator-rewinding/feed/ 0 Rewinding 3.3KV Stator http://www.gouk.co.nz/rewinding-33kv-stator/ http://www.gouk.co.nz/rewinding-33kv-stator/#comments Wed, 26 Nov 2014 03:43:31 +0000 http://www.gouk.co.nz/?p=680 The post Rewinding 3.3KV Stator appeared first on Gouk and Sullivan.

]]>

The post Rewinding 3.3KV Stator appeared first on Gouk and Sullivan.

]]> http://www.gouk.co.nz/rewinding-33kv-stator/feed/ 0 Rewinding http://www.gouk.co.nz/rewinding/ http://www.gouk.co.nz/rewinding/#comments Wed, 26 Nov 2014 02:46:07 +0000 http://www.gouk.co.nz/?p=672 The post Rewinding appeared first on Gouk and Sullivan.

]]>
  • image
    1. Stator stripped in temperature. Controlled burnout oven ready for insulation and re-winding
  • image
    2. Winding machines counting turns and making coils using enameled round copper wire
  • image
    3. Stator insulated and coil layed
  • image
    4. Stator insulated and coils layed
  • image
    5. Insulating between phase to phase and making connections
  • image
    7. Stator dipped varnished before curing in temperature controlled bake out oven
  • image
    8. Stator dipped varnished before curing in temperature controlled bake out oven

The post Rewinding appeared first on Gouk and Sullivan.

]]> http://www.gouk.co.nz/rewinding/feed/ 0